Automatic edgebander with premilling unit and corner rounding

0.4 - 15 mm (5/8") Edge cap.; panel thickness 5/16" - 2-3/8"; min. panel length 160 mm (6-3/8") and 65 mm (2-3/8") min. width.

Line Control (NO limit switches) for workstation function.

Pressure beam height adjustment for all workstations via digital height indicator.

PC-20 Program Control with: 12" Industrial PC screen; 256 MB RAM; 1 gB Flash card with USB Port & remote diagnostic link.

Signal infeed light to ensure proper spacing between panels.

‍

Equipped with:

2-Motor Premill unit; (2) 3 HP motors (12,000 RM) with straight and chamfer capability; program controlled indexing from straight to bevel.

Quick heat up glue system (approx. 10 minutes); hopper feeder & glue tank for maintenance & quick glue color change.

Glue temperature indicator for both the glue pot and glue roller with LED thermostat and automatic temperature reduction if the machine is idle for (15) minutes or more.

• The glue applicator roller is reversible and retractable from the fence line.

" Automatic magazine for strip & coil (large coil table; 800 mm dia. to accommodate large coils of 3 mm PVC stock); 3 mm PVC guillotine; (1) drive plus (3) secondary rollers "pneumatically controlled" pressure sections.

‍

Double-end trim with: (2) 0.5 HP - 12,000 RPM motors; chamfers 0°- 15° via programmable Controller.

Top & bottom flush/radius trim; bevels 0° - 15° (0.75 HP - 12,000 RPM motor); insert knives for 3 mm PVC radius.

* Corner Rounding Unit.

• Top & Bottom scraping for 3 mm PVC radius; pneumatically controlled indexing system.

Top & Bottom oscillating buffing (0.25 HP - 2,800 motors).|

Variable feed speed 36 - 65 FPM (3 HP feed motor).